MG Tech H
- Fire class: A1
- Smoke class: s1, d0
- Operating conditions: X
- Density, kg/m³: 900-1000
- Water absorption, %: <10
- Alkalinity , pH: 9
All physical and mechanical values are averages based on standard production and tested according to internal procedures. The typical values are given for guidance. The figures can change dependent on the test methods used. If a particular value is of prime importance for a specification, please consult MG Tech Ukraine.
- Theft strength, MPa: <7
- Compressive strength perpendicular to the surface of the plate, MPa: 9
- Change in linear dimensions under the influence of temperature and humidity,%: <0.05
- Specific resistance to screw pull-out, N/mm: 50
All physical and mechanical values are averages based on standard production and tested according to internal procedures. The typical values are given for guidance. The figures can change dependent on the test methods used. If a particular value is of prime importance for a specification, please consult MG Tech Ukraine.
- Thickness: 15, 20 mm
- Dimensions: 2400*1200, 1200*600 mm
Store in a dry and well-ventilated area under a canopy on a flat surface.
MG Tech Hard board is used for fire protection up to 240 minutes with burning after 1000°C:
- steel elements
- reinforced concrete structures
- slabs and tunnels.
The benefits of MG Tech Hard fire retardant boards:
- Fire resistance. High fire resistance retards the spread of fire and heat.
- Thermal insulation. Good thermal insulation properties help retain heat indoors and reduce heat loss.
- Mechanical strength. Good mechanical strength to withstand stress and maintain structural integrity in fire conditions.
- Moisture and corrosion resistant. Good moisture and corrosion resistance allows use in a variety of conditions and environments
- Eco-friendly. Produced from magnesite. It is a natural mineral that makes these boards sustainable and environmentally friendly.
- Installation and processing. Easy to install and can be processed using standard construction tools.
- Protection of structures against fire. Can be used for wall, ceiling, floor cladding, as well as protective coatings for steel and reinforced concrete structures.